Why can’t the tap be tightened? Perhaps Kendo’s friends have encountered this problem. There are many reasons for the faucet. Let’s take a look at it together.

The gasket of the faucet body is loose, so it needs to be removed and replaced with a new one. The ceramic Brass Bibcock core or the copper valve core is leaking. In this situation, just change the valve core. When installing, you need a wrench, a flat or cross screwdriver, and it can almost be done. The main body of the faucet has trachoma. In this case, you can only change the faucet.

In addition, we must do a good job in the maintenance of the faucet:

When the normal temperature is lower than zero degrees Celsius, if you find that the handle of the faucet has an abnormal feel, you must use hot water to scald the sanitary product until the hand feels normal, so that the service life of the faucet valve core will not be affected if you use it after the operation.

The phenomenon of dripping after the new faucet is closed is caused by the remaining water in the cavity after the faucet is closed. This is a normal phenomenon. If the water is ticking for a long time, it is a faucet problem, and the water is leaking, indicating that the product has a quality problem.

It is not advisable to switch the faucet too hard, just scroll quietly. Even if it is a traditional faucet, it doesn’t take a lot of effort to screw it down, just turn off the water. Also, don’t use the handle as an armrest to support or use.

The water contains a small amount of carbonic acid compounds, which simply form scale and corrode the surface of the metal after it evaporates.

This will affect the service life of the faucet. It is often necessary to use a soft cotton cloth or sponge to frequently scrub the appearance of the faucet. Don’t use a metal cleaning ball or scouring pad to clean it. Simply scratch the surface of the faucet. Nor can hard objects hit the surface of the faucet.